Mounting, shaft and ports
The brochure lists a straight shaft with keyway, an Ø82.5 mm mounting spigot and BSPF ports. Confirm all installation dimensions against the drawing before replacement.
Yuken Gerotor motor
Y-OMP-100 Series orbit motors
Gerotor-type hydraulic motor for low-speed, high-torque rotary motion, with mounting and connection details defined by the full model code.
Y-OMP-100Model prefix
GerotorMotor type
615 rpmMaximum continuous speed
140 barMaximum continuous pressure drop
Function and model selection
The Y-OMP-100 brochure identifies motor size 100 with geometric displacement of 97.3 cm³. Use the continuous and intermittent ratings separately when checking the application.
Gerotor-type hydraulic motor for low-speed, high-torque rotary motion, with mounting and connection details defined by the full model code.
Use the model comparisons below with the linked manufacturer catalogue. Send the complete designation and application details for selection support.
Model comparison
| Specification | Continuous maximum | Intermittent maximum |
|---|---|---|
| Speed | 615 rpm | 770 rpm |
| Torque | 190 Nm | 230 Nm |
| Output | 11 kW | 13 kW |
| Pressure drop | 140 bar | 175 bar |
| Oil flow | 60 l/min | 75 l/min |
These are separate catalogue limits, not one simultaneous operating point. Confirm duty cycle, the complete model code and the operating curve before selection.
Configuration and ordering
Seal and rotation confirmation
Confirm the seal code directly from the required motor designation: the brochure's example and seal listing are not consistent. RL identifies clockwise or counterclockwise rotation viewed from the shaft side; verify the circuit connections.
Selection support
Send the complete motor requirement
Include the motor nameplate, installation drawing and operating requirements to help confirm the correct configuration.
- Complete motor model and design number
- Required torque, speed and duty cycle
- Available flow and pressure difference
- Shaft, mounting, ports and drain details
- Radial/axial loads and installation drawing
- Nameplate photograph and quantity
Manufacturer catalogue
Specifications, model designations, installation drawings and configuration details for Y-OMP-100 Series orbit motors.
Enquire about Y-OMP-100 Series orbit motors
Send your model code and application details to Shree Hydraulics in Belagavi for selection and quotation enquiries across India.