CoolAce cooling products
A catalogue range of air-cooled oil coolers for hydraulic and lubrication cooling duties. Compare the model, fan and supply options, then confirm cooling performance for your application.
The AH Series spans compact models through larger fan-cooled units. Selection requires oil flow, heat load, oil and ambient temperatures, available electrical supply and allowable pressure drop.
AC and DC options are model-dependent. The larger models in this catalogue use three-phase AC fans; do not assume every AH cooler is available with every supply.
Five model flow ranges differ between the hosted catalogue and the current manufacturer webpage. These are marked for confirmation below. The page does not treat either conflicting value as an approved selection limit.
On smaller screens, scroll the table sideways to view all columns.
| Model | Catalogue oil flow | Fan diameter | Fan count | Listed fan supplies | PDF page |
|---|---|---|---|---|---|
| AH 0608 | 3-60 LPM | 150 mm | 1 | 230 V AC, 1P, 50 Hz; 12 / 24 V DC | 5 |
| AH 0608L | 3-60 LPM | 150 mm | 2 | 230 V AC, 1P, 50 Hz; 12 / 24 V DC | 6 |
| AH 1012 | 20-100 LPM | 250 mm | 1 | 230 V AC, 1P / 415 V AC, 3P, 50 Hz; 12 / 24 V DC | 7 |
| AH 1215 | 20-100 LPM | 300 mm | 1 | 230 V AC, 1P / 415 V AC, 3P, 50 Hz; 12 / 24 V DC | 8 |
| AH 1418 | 30-100 LPM | 350 mm | 1 | 230 V AC, 1P / 415 V AC, 3P, 50 Hz; 12 / 24 V DC | 9 |
| AH 1428 | 30-200 LPM | 350 mm | 1 | 230 V AC, 1P / 415 V AC, 3P, 50 Hz; 12 / 24 V DC | 10 |
| AH 1490 | Confirm current range* | 350 mm | 1 | 230 V AC, 1P / 415 V AC, 3P, 50 Hz; 12 / 24 V DC | 11 |
| AH 1680 | Confirm current range* | 400 mm | 1 | 230 V AC, 1P / 415 V AC, 3P, 50 Hz; 12 / 24 V DC | 12 |
| AH 1890 | Confirm current range* | 450 mm | 1 | 230 V AC, 1P / 415 V AC, 3P, 50 Hz | 13 |
| AH 1890T | Confirm current range* | 450 mm | 1 | 415 V AC, 3P, 50 Hz | 14 |
| AH 2432 | 30-300 LPM | 600 mm | 1 | 415 V AC, 3P, 50 Hz | 15 |
| AH 2583 | Confirm current range* | 625 mm | 1 | 415 V AC, 3P, 50 Hz | 16 |
| AH 3044 | 25-400 LPM | 750 mm | 1 | 415 V AC, 3P, 50 Hz | 17 |
| AH 3650 | 30-400 LPM | 900 mm | 1 | 415 V AC, 3P, 50 Hz | 18 |
| AH 3655 | 30-400 LPM | 900 mm | 1 | 415 V AC, 3P, 50 Hz | 19 |
Source: CoolAce air-cooled oil cooler catalogue, PDF pages 5-19. *AH 1490, AH 1680, AH 1890, AH 1890T and AH 2583 have different flow ranges in the hosted catalogue and current manufacturer webpage. Obtain manufacturer confirmation before selection. Fan supplies shown are separate catalogue variants; verify the complete model and nameplate. View the manufacturer's AH listing.
Each model has its own performance, pressure-drop and dimensional information. Check the curve conditions and actual oil/air temperatures rather than treating the model name as a universal cooling-capacity rating.
Confirm voltage, phase, frequency, fan current, oil connections, mounting dimensions and airflow clearance. For a replacement, provide a clear photograph of the existing cooler and fan nameplates.
Selection support
Include the existing model for a replacement, or the complete operating conditions for a new installation. Selection and quotation will be confirmed against your requirement.
Open the AH Series reference in the PDF hosted on Shree Hydraulics.
Contact Shree Hydraulics in Belagavi for product selection and quotation enquiries across India.
