Yuken hydraulic actuators
CE Series standard hydraulic cylinders with seven mounting types, seven bore sizes and B or C rod options.
Select the mounting arrangement first, then confirm bore, rod type, stroke and cushioning against the manufacturer drawing. The full designation is needed to identify a replacement cylinder.
CE Series standard hydraulic cylinders with seven mounting types, seven bore sizes and B or C rod options.
Use the model comparisons below with the linked manufacturer catalogue. Send the complete designation and application details for selection support.
| Specification | Catalogue details |
|---|---|
| Cylinder bore | 40, 50, 63, 80, 100, 125 and 150 mm |
| Rod type B | Heavy Duty Type |
| Rod type C | Standard Type |
| Maximum operating pressure | 140 Kgf/cm²; LB mounting: 70 Kgf/cm² |
| Minimum operating pressure | 3 Kgf/cm² |
| Operating speed | 10–300 mm/sec; keep surge pressure within the catalogue limits |
| Ambient temperature range | -10 to +80°C |
| Stroke | Confirm for the selected bore, rod, mounting and buckling strength |
The catalogue specifies surge pressure limits of 210 Kgf/cm², reduced to 105 Kgf/cm² for LB mounting. Pressure units are retained from the manufacturer catalogue. Confirm stroke using its buckling-strength chart and mounting drawings.
Model prefix: CELA
Check side-lug fixing centres, knock pin holes and the installation length for the required stroke.
Bores: 40, 50, 63, 80, 100, 125 and 150 mm. Rod options: B (Heavy Duty Type) and C (Standard Type).
Mounting drawingModel prefix: CELB
Check the end-angle fixing dimensions. The catalogue reduces maximum operating pressure to 70 Kgf/cm² for LB mounting.
Bores: 40, 50, 63, 80, 100, 125 and 150 mm. Rod options: B (Heavy Duty Type) and C (Standard Type).
Mounting drawingModel prefix: CEFA
Check the rod-end flange dimensions, fixing holes and locating diameter against the installation drawing.
Bores: 40, 50, 63, 80, 100, 125 and 150 mm. Rod options: B (Heavy Duty Type) and C (Standard Type).
Mounting drawingModel prefix: CEFB
Check the head-end flange dimensions and overall length with the required stroke.
Bores: 40, 50, 63, 80, 100, 125 and 150 mm. Rod options: B (Heavy Duty Type) and C (Standard Type).
Mounting drawingModel prefix: CETA
Check the rod-side trunnion diameter, span and support arrangement for the installation.
Bores: 40, 50, 63, 80, 100, 125 and 150 mm. Rod options: B (Heavy Duty Type) and C (Standard Type).
Mounting drawingModel prefix: CETC
Check the intermediate trunnion position and installation length when specifying the stroke.
Bores: 40, 50, 63, 80, 100, 125 and 150 mm. Rod options: B (Heavy Duty Type) and C (Standard Type).
Mounting drawingModel prefix: CECA
Check the head clevis dimensions, pin diameter and installation length against the machine drawing.
Bores: 40, 50, 63, 80, 100, 125 and 150 mm. Rod options: B (Heavy Duty Type) and C (Standard Type).
Mounting drawingCushion codes: B for both ends, R for the rod end, H for the head end and N for no cushion. The optional F prefix identifies the phosphate ester fluid specification. Confirm the required fluid and seal specification before ordering.
The designation includes CE, mounting code, bore, rod type, pressure code, cushion location, stroke, design number and design standard. The letter B appears in both rod-type and cushioning fields, so identify it by its position in the full code.
Selection support
Include the cylinder nameplate and a dimensioned installation drawing so the mounting, bore, rod and stroke can be checked together.
Specifications, model designations, installation drawings and model details for CE Series hydraulic cylinders.
Send your model code and application details to Shree Hydraulics in Belagavi for selection and quotation enquiries across India.
