Valve and amplifier pairing
Confirm the full valve designation, AMLS amplifier type, 24 V or 48 V supply variant and command signal. The LSVG-03-60 uses amplifier type B; the smaller rated-flow models use type A.
Yuken direct type
Direct type high speed linear servo valves with spool-position feedback and a separate AMLS amplifier.

The LSVG-03 family uses a moving-coil linear motor, spool and position sensor connected in series. Select the rated flow and matching amplifier from the complete model designation.
Direct type high speed linear servo valves with spool-position feedback and a separate AMLS amplifier.
Use the model comparisons below with the linked manufacturer catalogue. Send the complete designation and application details for selection support.
| Model prefix | Rated flow at ΔP = 7 MPa | Maximum operating pressure | Amplifier type |
|---|---|---|---|
| LSVG-03-4 | 4 L/min | 35 MPa | AMLS-A |
| LSVG-03-10 | 10 L/min | 35 MPa | AMLS-A |
| LSVG-03-20 | 20 L/min | 35 MPa | AMLS-A |
| LSVG-03-40 | 40 L/min | 35 MPa | AMLS-A |
| LSVG-03-60 | 60 L/min | 35 MPa | AMLS-B |
Rated flow is specified at a valve pressure difference of 7 MPa. Use the catalogue flow curves for the actual circuit pressure difference.
Confirm the full valve designation, AMLS amplifier type, 24 V or 48 V supply variant and command signal. The LSVG-03-60 uses amplifier type B; the smaller rated-flow models use type A.
Check seal specification and cable departure direction against the catalogue. Drain port Y back pressure must be 0.05 MPa or less and must not be negative.
Selection support
Include the existing model label and circuit or wiring details so the valve and electronics can be checked together.
Specifications, model designations, installation drawings and electrical details for LSVG Series linear servo valves.
Browse LSVG direct valves, LSVHG two-stage valves and matching AMLS amplifiers.
Send your model code and application details to Shree Hydraulics in Belagavi for selection and quotation enquiries across India.