EHDFG-01 and 03 direction and flow valves

Compare the two direct-control sizes and their metre-in and metre-out configurations.

250 Kgf/cm²Maximum operating pressure

30 / 60Rated flow, L/min.

24 V DC21–28 V DC including ripple

±5 VDirectional command

Function and model selection

EHDFG-01 and EHDFG-03 combine proportional flow and directional control. On-board electronics receive a signed voltage command for the two solenoids.

Compare the two direct-control sizes and their metre-in and metre-out configurations.

Use the model comparisons below with the linked manufacturer catalogue. Send the complete designation and application details for selection support.

Model	Rated flow, L/min.	Maximum power input
EHDFG-01	30	40 W
EHDFG-03	60	45 W

Rated flow is specified at valve ΔP 70 Kgf/cm². Maximum tank-line pressure is 70 Kgf/cm² for both models.

The catalogue lists 3C2 and 3C40 centre-position symbols, with metre-out, metre-in and combined metre-in/metre-out options.

The input is 0 to -5 V for solenoid a and 0 to +5 V for solenoid b. Confirm the required direction and full model designation before ordering.

Selection support

Include the existing model label and circuit or wiring details so the valve and electronics can be checked together.

Specifications, model designations, installation drawings and electrical details for EHDFG-01 and 03 direction and flow valves.

Send your model code and application details to Shree Hydraulics in Belagavi for selection and quotation enquiries across India.