Choose the command signal
PW200-V accepts a voltage command; PW200-A accepts a current command. Confirm the machine controller output before selecting the version.
Valve-mounted control electronics
PW200 proportional valve controller
Choose voltage-input or current-input control for the Yuken EDG series.
24 VDC ±10%Power supply
1 channelController output
1 AMaximum output, 10Ω solenoid
V / AVoltage or current input
Controller selection
PW200 is a single-channel controller designed for Yuken EDG proportional pilot relief valves. It mounts directly on the valve, reducing the need for amplifier space inside the control panel.
Choose voltage-input or current-input control for the Yuken EDG series.
Use the model comparisons below with the linked manufacturer catalogue. Send the complete designation and application details for selection support.
Models and electrical details
| Specification | PW200-V | PW200-A |
|---|---|---|
| Input control range | 0–10V DC | 4–20 mA |
| Input impedance | 20KΩ | 250Ω |
| Channels | 1 | 1 |
| Power supply | 24 VDC ±10% | 24 VDC ±10% |
| Maximum output | 1A (10Ω solenoid) | 1A (10Ω solenoid) |
The manufacturer specifies this controller for the EDG series. Confirm the exact valve and controller pairing.
Configuration and ordering
Connection and adjustment
The catalogue shows push-in terminal connections and minimum and maximum adjustment points. Use the supplied wiring diagram for terminal identification.
Selection support
Send the complete control requirement
Include the existing model label and circuit or wiring details so the valve and electronics can be checked together.
- Complete amplifier and valve model codes
- Supply voltage and controller output signal
- Coil resistance and required output current
- Feedback and connector details
- Nameplate photograph and quantity
Manufacturer catalogue
Specifications, model designations, installation drawings and electrical details for PW200 proportional valve controller.
Enquire about PW200 proportional valve controller
Send your model code and application details to Shree Hydraulics in Belagavi for selection and quotation enquiries across India.