DMG-06 spring-offset flow
For 2B models, the catalogue lists 420 L/min at 70 Kgf/cm², 300 L/min at 140 Kgf/cm², 250 L/min at 210 Kgf/cm² and 200 L/min at 315 Kgf/cm².
Yuken manually operated directional valves
DMG Series directional valves
Compare DMG-01, DMG-03 and DMG-06 manually operated valves. Confirm the spool function, lever arrangement and operating limits for your requirement.
3 sizesDMG-01, DMG-03 and DMG-06
Manual leverShifts the valve spool
250 / 315Kgf/cm² maximum operating pressure by size
2 or 3Positions, depending on configuration
Control flow direction by hand
The DMG Series uses a hand lever to move the spool and change the direction of oil flow. The G designation identifies sub-plate mounting.
Spring-centred, no-spring detented and spring-offset models provide different switching arrangements. Match the full model code and hydraulic circuit symbol to the required positions and neutral condition.
For a replacement valve, share a clear nameplate photograph along with mounting details and the existing lever arrangement.
Compare the three DMG sizes
| Series | Catalogue flow ceiling | Maximum operating pressure | Maximum T-line back pressure |
|---|---|---|---|
| DMG-01 | 35 L/min | 250 Kgf/cm² | 140 Kgf/cm² |
| DMG-03 | 100 L/min | 250 Kgf/cm² | 160 Kgf/cm² |
| DMG-06: 3C, 3D, 2D | 500 L/min | 315 Kgf/cm² | 210 Kgf/cm² |
| DMG-06: 2B | 200 L/min at 315 Kgf/cm² | 315 Kgf/cm² | 210 Kgf/cm² |
Flow ceilings describe the catalogue changeover limits. DMG-03 spring-centred and spring-offset limits vary with spool type. Use the manufacturer tables for the exact configuration and operating pressure.
Back pressure and drain
DMG-01 lever operating torque varies with T-line back pressure. For DMG-03 and DMG-06, the catalogue requires the drain port to connect directly to the reservoir when T-line back pressure exceeds 70 Kgf/cm².
Choose the spool arrangement
| Code | Positions | Arrangement |
|---|---|---|
| 3C | 3 | Spring-centred |
| 3D | 3 | No-spring detented |
| 2D | 2 | No-spring detented |
| 2B | 2 | Spring-offset |
Spool availability varies by size and arrangement. Special two-position models use a centre position and one offset position. Check the catalogue combination table before specifying these models or special seals.
Selection support
Send the complete DMG requirement
Include the model code and operating conditions so the valve configuration can be checked before quotation.
- Full DMG model code and nameplate photograph
- Spool function and required positions
- Spring or detent arrangement and lever position
- Required flow, operating pressure and tank back pressure
- Mounting interface, sub-plate and drain connection
- Hydraulic fluid, quantity and required timing
DMG technical catalogue
Review model codes, circuit symbols, flow ratings, mounting details and dimensions.
Enquire about a DMG valve
Send your model code, operating conditions and quantity to Shree Hydraulics.